A lot of people put in luxury vinyl plank because it’s tough and water won’t hurt it. Both are true. LVP still needs the right kind of cleaning, though, and it’s easy to get wrong.
The top of every plank is a clear wear layer. It’s what keeps the printed surface underneath looking like wood or stone. Abrasive cleaners and scrub pads scratch it. Wax-based products leave a film that builds up, turns cloudy and holds dirt. Steam mops put heat on it. Once that layer is scratched or worn through, there’s no fixing it. You’re replacing planks.
Why LVP starts looking dull
Usually it isn’t the floor. It’s what’s on the floor. Layers of cleaner residue, ground-in dirt and scuffs in the busy spots make the planks look flat and tired. Take that off and most LVP looks a lot closer to the day it went in. It happens most in homes that mop often with a product that leaves a film. More mopping means more film.
How we clean it
We use pH-neutral cleaning solutions and methods made for vinyl flooring. No abrasives, no wax, no heat. We remove the dirt, scuffs and product buildup and pay attention to the edges and the transitions to other floors, where grime collects.
We’ll also tell you what cleaning won’t change. Deep scratches, gouges and planks that have lifted or separated are damage, not dirt, and we’ll point them out before we start.
Keeping it clean
Sweep or vacuum often, since grit is what scratches the wear layer. Mop with water or a cleaner made for vinyl plank. Skip wax, polish and steam. Mats at the doors catch a lot of grit before it reaches the floor, and felt pads under chair legs help too.
One room or the whole house, the process is the same, and so is the care we take with your floor.
